- Mac audio input switches how to#
- Mac audio input switches manual#
- Mac audio input switches software#
- Mac audio input switches mac#
If you're recording vinyl, make sure your turntable is properly set up (its manual will explain how), its needle is free from fluff, and the record itself is free from dust and fingerprints by using a suitable anti-static brush or cloth and cleaning solution.įor cassette tapes, ensure your deck's playhead and tape pinch rollers are free of gunk using a cassette cleaning kit. In essence, you'll need to connect the left and right RCA phono ends of the RCA phono to 3.5mm jack cable to a suitable RCA analogue audio output on your amplifier, and then plug the 3.5mm jack in to the line-in audio input of the Griffin iMic and make sure that device's Mic/Line switch is set to the Line position.īefore you get gung-ho with an audio recording app on your Mac, it pays to make sure the sound coming into your computer is as 'clean' as possible.
Mac audio input switches how to#
You'll find instructions on how to do this in your hi-fi amplifier's manual. The next step is to connect your hi-fi to your Mac. You won't need a preamp if you're recording from other old formats, such as cassette tapes, as your existing hi-fi amp will be able to handle them without additional amplification.
Mac audio input switches mac#
If you're recording from a turntable that doesn't have USB, your best bet is to connect your Mac to a hi-fi amp with a built-in phono preamp (which boosts the audio output from your turntable so you can hear it through your speakers and your Mac), or use an external phono preamp such as the Pro-Ject Phono Box MM. Your local hi-fi shop will be able to advise you on the best options that fall within your budget. If you're planning to record straight from your existing hi-fi, you'll need a stereo RCA phono to 3.5mm jack cable (available online), though the more money you spend the better the audio quality will be. You'll also need suitable cables to carry the sound signals from your source into the iMic. The most affordable option for most users is the Griffin iMic, which includes 3.5mm microphone and line-in analogue audio inputs so you can record whatever you like. To set up a surround (multichannel) speaker configuration, click Configure Speakers, then set up the configuration.That means you'll need to add some third-party hardware to get your old media into your modern Mac. Drag the sliders to set the volume for each channel.
Mac audio input switches software#
If software volume control is available for your device, the Volume sliders appear blue to indicate that they’re active. You can also choose Enable or Disable from the menu, to keep the hardware sample rate converter turned on or off. The hardware sample rate converter is turned off if the input stream is encoded. When you choose Automatic from the pop-up menu, the hardware sample rate converter is turned on if the audio samples coming in are PCM and formatted according to the international standard IEC 60958-3.
If your Mac supports the hardware sample rate converter, the Hardware Rate Converter pop-up menu is available in the Input pane. Make sure they match the appropriate settings for your audio device. In most cases, “Clock source” is set to the default.Ĭlick the Format pop-up menu, then set the sample rate and bit depth. On the right side of the Audio Devices window, choose the options available for the device you selected: You may be asked to unlock your device with a passcode or to trust the device.Ĭontrol-click the device, or click the Configure Selected Device pop-up menu at the bottom-left of the sidebar, then choose how the device is going to be used:įor sound input: Choose Use This Device for Sound Input.įor sound output: Choose Use This Device for Sound Output.įor playing system sounds: Choose Play Alerts and Sound Effects Through This Device. Note: For iOS and iPadOS devices, first click Enable, then select the device.
0 kommentar(er)
